🔧 90° Flexible Drill Extension – Reach Tight Corners with Ease | Support Handle Included

🔧 90° Flexible Drill Extension – Reach Tight Corners with Ease | Support Handle Included

Regular price $34.99
Regular price $34.99 Sale price
SAVE Liquid error (snippets/price line 119): Computation results in '-Infinity'% Sold out
 
 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

🔧 90° Flexible Drill Extension – Reach Tight Corners with Ease | Support Handle Included

🔧 90° Flexible Drill Extension – Reach Tight Corners with Ease | Support Handle Included

Regular price $34.99
Regular price $34.99 Sale price
SAVE Liquid error (snippets/price line 119): Computation results in '-Infinity'% Sold out
View full details

90° Flexible Drill Extension

When a cabinet wall blocks the body of your drill, bring the bit to the screw from the side. The fixed right-angle head changes the driving direction, while the flexible shaft lets you position the drill where there’s room.

Flexible drill extension with a right-angle head and support handle

Reach Around a Shelf or Inside a Frame

Guide the head into the corner and route the shaft around the obstruction in a gentle curve. The head stays at 90° as you adjust the path of the shaft.

Guide the Head with the Support Handle

The detachable handle gives your free hand a place to steady the metal head while you line up the bit with a recessed screw.

Check Both ¼-Inch Hex Connections

On the drill end, the ¼-inch (6.35 mm) hex shank fits a compatible chuck or driver holder. On the fastener end, the head accepts a compatible ¼-inch hex driver bit. Choose the bit that matches your screw.

What’s in the Kit

You receive one flexible right-angle extension and one detachable support handle. The ribbed black shaft meets a metal head with textured silver fittings. Supply your own compatible drill and driver bits.

Black and metallic silver right-angle extension set

Tool Specifications

Driving angle
Fixed 90°
Input
¼-inch (6.35 mm) hex shank
Output
¼-inch (6.35 mm) hex bit holder
Listed weight
325 g (approx. 11.5 oz)
Finish
Black and metallic silver

Setup & Operating Limits

  1. With the tool powered off, secure the input shank in a compatible chuck or holder and fit the correct driver bit.
  2. Attach the support handle, route the shaft in a gentle curve, and align the bit with the fastener.
  3. Support the head by the handle and keep your hands clear of rotating parts. Follow the operating instructions for both the tool and the attachment.

Avoid sharp bends. Check the manufacturer’s permitted speed and torque before use. Use impact mode only if the attachment manufacturer confirms compatibility.

Get the Right-Angle Extension Kit

View the Drill Extension Kit